Detaljer
The Megaforce2 design was optimized from ground up, to give
exceptional torsional stiffness combined with minimal weight when
used in combination with wide and super wide 31.8 mtb bars and with
the new tapered (E2) steerer tubes with 1 1/8th stem interface
diamete
The result
Similar torsional stiffness values as our
large volume Force 1.5, but at the same time less weight than our
already light weight Superforce - 132g at 70mm stem length. Low
profile for a minimum built height above the headset, and the first
of its kind to be greater in width than profile height, dimensions
being 36 x 42 mm.
Precision and comfort
Noticeably preciser steering control with
super wide bars. Reduction of swaying tendancy (out-of-phase)
while retaining the dampened vertical compliance (in-phase) at the
bar ends. The new combination of extreme proportioned cross
sectional stem body, while possessing a tangential transition of
the 1 1/8th fork interface clamp allows a deeper recessing of the
stem clamping bolts facing the knees than previously
possible.
Perfect for everyone
Superfit sizing system with 6° (with
FlipFlop design) stem angle - ideal for the current frames
reduced steerer tube lengths geometries. Six fine tuning lengths
from 30 mm to 80 mm in 10 mm (!) intervals.
VR-3 The Red Monster tested
The worldwide toughest testing machine for
bars and stems. Tested with bars up to 800 mm width and approved
with no restrictions (rider weight or usage). Tuned with Ti bolts,
own form fitting Megaforce-Litecap as well as further plug and
play tuning components, which are still in preparation.
Delivery
Megaforce 2 stem, titan screws, Litecap
(w/o screw)
Lengths & Weights
(stem)
80 mm: 107 g
Steerer Ø
28.6 mm (1 1/8")
Steerer Height
36 mm
Minimum Insert
(steerer)
30 mm
Handlebar Clamp Ø
31.8 mm
Angle
6° FlipFlop
Color
Raceblack